by Danny | May 27, 2024 | Owner's Guides
The FEP film is a consumable – and a good rule of thumb is to replace them every 40 or so prints, or whenever there is noticeable scratching, denting or deformation. Otherwise, you run the risk of a puncture letting resin seep onto your LCD screen during a print –...
by Danny | May 27, 2024 | Owner's Guides
I searched high and low for the best means to preview a 3D print file prior to opening them up in a slicer such as Lychee or Cura. 3D files can become large and heavy in no time, and this often means loading up a file one at a time into your slicing software is a slow...
by Danny Le Roux | Apr 14, 2024 | Owner's Guides
If you’ve ever tried creating clear 3D prints with some of the readily available transparent resin brands such as Elegoo Transparent resin or Anycubic’s Transparent range, chances are they appear either yellowed or barely transparent at all. The former is because UV...